Glass area & lite counts
Glass designation, make-up, panel count and measured area, grouped by opening and elevation. Gross and fabrication bases stay distinct.
Tender measurement rules / RICS NRM 2 where specified / m² / m / nr
Shopfront Estimating Services United Kingdom
Opening-by-opening storefront or shopfront quantities for framing, glass, entrances and associated hardware.
Quote response and delivery date confirmed after document review.
Glass, metal and openings — separated.
Framing profile register
Heads, sills, jambs, mullions and transoms by system and profile. Cut lengths and waste require an agreed basis.
Doors & hardware sets
Entrances, doors and hardware by mark, with supply, installation and unresolved responsibilities visible.
Measurement output: m² / m / nr. Pricing, manufacturer deductions and procurement quantities are confirmed separately.
What your shopfront estimating package covers
| Package | Measurement scope | Basis to confirm |
|---|---|---|
| Framing | Separate heads, sills, jambs, mullions, receptors and subsills by profile. | Confirm centre/front-set and thermal/non-thermal systems before combining lengths. |
| Glass | Schedule vision, opaque and door lites against the relevant opening. | Bite, edge clearances and glass deductions require the nominated system. |
| Entrances | Count leaves, closers, pivots, locks and access-control interfaces. | Confirm supply and installation responsibility for each hardware set. |
United Kingdom: tender and specification basis
Use shopfront, curtain walling, cill and ironmongery terminology where appropriate. Supply the prescribed bill of quantities and measurement rules rather than assuming a universal format.
Identify the UK project jurisdiction, tender return format, revision register and VAT basis where pricing is requested. Keep fire and acoustic classifications attached to the specified assembly.
08 41 13 entrances and storefronts, where specified. Specification references describe the tender scope; they do not certify design, product or code compliance.
INSPECT THE OUTPUT
A drawing reference behind every row
Inspect the illustrative opening register, workbook and annotated drawing. These examples demonstrate the output structure and are labelled as illustrations.
Open sample package →Where glazing bids lose scope
Break metal, subsills and perimeter flashings excluded
Check the current detail, record the quantity basis and assign a named scope question before bid approval.
Door hardware counted in two trade packages
Check the current detail, record the quantity basis and assign a named scope question before bid approval.
Thermal and non-thermal frame quantities combined
Check the current detail, record the quantity basis and assign a named scope question before bid approval.
Threshold and waterproofing interfaces left unassigned
Check the current detail, record the quantity basis and assign a named scope question before bid approval.
Quantity takeoff or full priced bid?
| Deliverable | Quantity takeoff | Full priced estimate |
|---|---|---|
| Measured scope | Glass, framing and scheduled opening quantities | Same measured scope with agreed cost inputs |
| Pricing | No supplier or installation prices implied | Material, fabrication, labour and equipment inputs as commissioned |
| Required inputs | Current documents, units and system details | QTO inputs plus quotations, rate sources, access and commercial assumptions |
| Review | Source references, assumptions and RFIs | Quantity review plus rate validity and allowance review |
| Acceptance | Written scope and deliverable agreement | Pricing availability and responsibility confirmed before acceptance |
Documents to include
- Storefront elevations and entrance schedules
- Head, sill, jamb and corner details
- Door hardware sets and electrical interfaces
Request your shopfront estimating quote
Prepare your bid package
Takeoff & quality control
Glazing accessories takeoff checklist
Sealants, gaskets, setting blocks, flashing and closures can disappear between the glass and metal schedules. Quantify them using the actual detail and trade scope.
Storefront & shopfrontStorefront and shopfront takeoff checklist
Break the opening into system profiles, glass, entrances and perimeter details. Avoid combining lengths from incompatible frame systems.
Storefront & shopfrontStorefront doors and hardware responsibilities
Entrance hardware crosses glazing, ironmongery and electrical scopes. Link every scheduled set to its opening and responsible party.
Storefront & shopfrontCommon storefront estimating scope gaps
Review the edges of the storefront package: the supporting opening, perimeter details and hardware interfaces often contain unassigned work.
Related services in United Kingdom
Glazing Takeoff →Curtain Walling Estimating →Commercial Window Estimating →Internal, Acoustic & Fire Glazing Takeoff →
Back to United Kingdom hub →